difference way press

difference way press Bruderer Leinhaas DDP2-R11-125Power: 125 t, Table: 1100x700 mm, Ram: 700x350 mm
Daylight: 380 mm, Stroke: 1-120 mm,
Information

eccentric press

eccentric press Edelhoff AZR H 63Power: 63 t, Table: 650x500 mm, Ram: 360x275 mm
Daylight: 380 mm, Stroke: 10-100 mm, UVV: yes
Information
eccentric press EBU SK 75adjustable tableInformation
eccentric press Weingarten ER80Power: 80 t, Table: 710x560 mm, Ram: 400x300 mm
Daylight: 470 mm, Stroke: 8-112 mm, UVV: yes
Information
eccentric press Mueller Gefrees EXP 80 SFHKhydraulic Ortlinghaus clutch with double brakeInformation
eccentric press Edelhoff AZR 100Power: 100 t, Table: 850x580 mm, Ram: 440x370 mm
Daylight: 400 mm, Stroke: 20-110 mm,
Information
eccentric press Weingarten AR125mechanically overhauled, new ball screw, clutch and brake equipped with various new partsInformation
eccentric press Weingarten ARP125mechanical break protectionInformation
eccentric press Manzoni CR 130Thydraulic overload, pneumatic Ortlinghaus clutchInformation
eccentric press Weingarten XRRII150VW control 2-hand safe, VW flow protection, gear reduction, electromagnetic clutchInformation
eccentric press Weingarten XRRIII150TbFlow protection retrofitted, 2-hand control unit Jacob Safety, foot control possible, motorized ram adjustmentInformation
eccentric press Weingarten XRRIII150TcFlow protection retrofitted, control unit Jacob SafetyInformation
eccentric press Smeral LE 160Power: 160 t, Table: 900x500 mm, Ram: 600x350 mm
Daylight: 450 mm, Stroke: 20-120 mm,
Information
eccentric press Nuova Omec AC 160UVV possibleInformation
eccentric press Smeral LEK 250new press controlInformation
eccentric press Betz EZL300pneumatic single disc clutch with separate additional brakeInformation
eccentric press Heilbronn REP315Power: 315 t, Table: 1400x950 mm, Ram: 1000x700 mm
Daylight: 587 mm, Stroke: 25 - 200 mm,
Information
eccentric press Erfurt PEE I 400Ejector in the ram, die cushion in the tableInformation

Equipment

equipment Ortlinghaus Suited for Weingarten presses 100-160 tonsInformation
equipment Parker Hannifin BG zertificatedInformation

feeding line

feeding line Kemmerich VC1000A-S-400-SCombined reel / straightener in short designInformation
feeding line Kohler 30.80/20-300-1UVV: CEInformation
feeding line ALBA/Heilbronn HVS400, RMGMaterial 400x3mmInformation
feeding line Dreher-GSW Material 500x5mmInformation

fine blanking press

fine blanking press Schmid HRS 160Power: 160 t, Table: 595x714 mm, Ram: diameter 450 mm
Daylight: 420 mm, Stroke: 80 mm,
Information

High speed press

High speed press Essa BH30Power: 30 t, Table: 380x370 mm, Ram: 280x195 mm
Daylight: 242 mm, Stroke: 32 fest mm,
Information
High speed press Haulick RVD40Power: 40 t, Table: 600x500 mm, Ram: 500x380 mm
Daylight: 280 mm, Stroke: 08 - 50 mm,
Information

High Speed Press

High speed press Raster HR45/7000 NL-4SSiemens S7 controlInformation

High speed press

High speed press Kaiser V 50 W 860Siemens S7 controlInformation

High Speed Press

High Speed Press MOLL EP - 80Power: 80 t, Table: 550x600 mm, Ram: 540x400 mm
Daylight: 354 mm, Stroke: 0 - 60 mm,
Information

High speed press

High speed press Heilbronn AREPZ75hydraulic overload protection, hydraulic clutch with additional brakeInformation
High speed press RVD80 Power: 80 t, Table: 780x640 mm, Ram: 800x460 mm
Daylight: 300 mm, Stroke: 13 - 80 mm,
Information
High speed press Haulick + Roos RVD 100-910UVV for automatic operationInformation
High speed press PME PE 100DRoll feed Keproma, Servopower 2020, bandwidth max. 300mm, control Siemens and PilzInformation
High speed press Haulick RVD160SUVV for automatic operationInformation
High speed press Hydrap HPDZbSiemens S5 controlInformation
High speed press Kaiser V200WRThe press was overhauled, including a new table and push plate. The control system has been renewed.Information
High speed press Nuova Omec SC1 250UVV for automatic operationInformation
High speed press IWK PEKRD 250with feeding lineInformation
High speed press Krupp PEKRD250Siemens S7 controlInformation
High speed press IWK PEKRD 250without feeding line Information
High speed press Mueller Gefrees PZE 315x1300UVV for automatic operationInformation
High speed press Schuler PKN 320Power: 320 t, Table: 530x530 mm, Ram: 400x400 mm
Daylight: 400 mm, Stroke: 95 mm,
Information
High speed press Heilbronn SAR 320the punching machine is currently completely disassembledInformation
High speed press Rovetta Power: 400 t, Table: 2500x1400 mm, Ram: 2500x1400 mm
Daylight: 400 mm, Stroke: 0 - 315 mm, UVV: CE
Information
High speed press Weingarten HUQ400 22FPower: 400 t, Table: 2200x1360 mm, Ram: 2000x1000 mm
Daylight: 540 mm, Stroke: 150 mm,
Information
High speed press Weingarten HUQ 400.25Weingarten Press control, feeding line KemmerichInformation
High speed press Edelhoff DARRW 500new Siemens S7 control, completely overhauled, with servo motor and frequency converterInformation

hydraulic 4 column press

hydraulic 4 column press Hydrap HPD-S 100Cutting impact damping, controllable depending on pressure, time and distance, upper and lower stroke limitation, mechanical ram locking, two-hand operationInformation
hydraulic 4 column press Hochstein RPP3002-hand operation and foot operation possibleInformation

hydraulic 4 column press

hydraulic 4 column press Luitgart Power: 450 t, Table: 2500x1500 mm, Ram: 2500x1500 mm
Daylight: 2400 mm, Stroke: 1300 mm, UVV: CE
Information

hydraulic 4 column press

hydraulic 4 column press Luigart 4 SPY 500 SOSiemens S7 control, ground level installationInformation
hydraulic 4 column press Oevermann VP 700was overhauled in 2005Information

hydraulic c-frame press

hydraulic c-frame press Mueller CT.16.1.6Power: 16 t, Table: 450x400 mm, Ram: diameter 80 mm
Daylight: 400 mm, Stroke: 300 mm, UVV: yes
Information
hydraulic c-frame press Schoen TES C 25Power: 25 t, Table: 650x650 mm, Ram: diameter 140 mm
Daylight: 500 mm, Stroke: 130 mm, UVV: yes
Information
hydraulic c-frame press Exner H4 SP450Power: 450 t, Table: 1100x850 mm, Ram: diameter 300 mm
Daylight: 600 mm, Stroke: 200 mm,
Information

hydraulic straight sided press

hydraulic straight sided press Schoen SH 30Modification 1987Information
hydraulic straight sided press Schoen UTE 50modification 1998Information
hydraulic straight sided press Schoen NH-LF 100/5Control conversion by PMEInformation
hydraulic straight sided press SMG HZPU 100-1250/1000Siemens S7 controlInformation
hydraulic straight sided press Schoen UTE 125Power: 125 t, Table: 600x450 mm, Ram: 600x450 mm
Daylight: 500 mm, Stroke: 200 mm,
Information
hydraulic straight sided pressHydrap HPDZB 160Siemens S5 controlInformation
hydraulic straight sided press Mueller SD250 / 200.2.1Power: 200 t, Table: 1100x900 mm, Ram: 1100x900 mm
Daylight: 600 mm, Stroke: 250 mm,
Information
hydraulic straight sided press SMG HZPU 1250/10001995 overhauled electrical controlInformation
hydraulic straight sided press Edelhoff HZP250Power: 250 t, Table: 1030x1070 mm, Ram: 854x1000 mm
Daylight: 400 mm, Stroke: 150 mm,
Information
hydraulic straight sided press Luigart DRPY 300 SOSiemens S7 controlInformation
hydraulic straight sided press Hydrap HPDb 315Siemens control, Sick light barrierInformation
hydraulic straight sided press Sutherland SD 3600Power: 600 t, Table: 3070x1530 mm, Ram: 3070x1530 mm
Daylight: 950 mm, Stroke: 305 mm,
Information

mechanical straight sided press

mechanical straight sided press Mecfond S5000 3500-2500Moving bolsterInformation
mechanical straight sided press Krupp PDqV 4-800CE, Weingarten electric new in 1997Information

knuckle joint press

knuckle joint press Graebener GKF400Conversion to 600 tons of printing capacity possibleInformation

roll feeder

roll feeder Raster WV 200Material 200x2mm, Lauer controlInformation

Rotary Turning Machine

Rotary Turning Machine SEMA RTA 70-8-NC-A8 StationsInformation

sintering press

high performance mechanical press machine Dorst TPA 70pull-off force 200 kN, Counterholding force in press position 400 kN, upper punch stroke 150 mm, upper punch adjustment travel 220 mm, stroke rate 6 - 30 1/minInformation
mechanical press machine Dorst TPA 35pull-off force 300 kN, Counterholding force in press position 120 kN, upper punch stroke 175 mm, upper punch adjustment travel 70 mm, stroke rate 15 - 40 1/minInformation

spindle press

spindle press Hilu HYSK 125WThe machine is suitable for stamping, upsetting and punchingInformation

tool manipulator

tool manipulator Persico M10-MF 2007UVV: CEInformation